Request quote

    Request a quote

    Please, fill the form

    JTG PRODUCTS

    Jersey Tempered Glass supplies glass for use in
    Architectural, Commercial, Residential and
    Industrial markets.

    Hole Drilling

    Some of our products include:
    • Flat Tempered Glass
    • Heat Strengthened Glass
    • Beveled Glass
    • Victorian Antique (a JTG registered trademark)
    • Flat Polishing
    • Hole Drilling
    • Hinge and Corner Cutouts
    Insulated units:
    • Single and Double Seal
    • Triple and Quad Units
    • Low Profile and Standard Site Lines
    • Warm Edge Units
    • Muntins and Duplex Muntins

    Depending on your type of project, you may need to have holes drilled in the glass. Let’s say it is a hole in a glass door for the knob or the holes in the glass railing system to fit the hardware. We can drill holes of different diameters for whatever you need.

    Request quote

      Order

      Please, fill the form

      JTG GLASS FOR

      Houses

      Houses

      Yachts

      Yachts

      Offices

      Offices

      Millwork

      Millwork

        Contact us

        Please fill out the form below to request a quote or place an order

        Faq

        How do the edges of the glass come?

        All tempered glass comes with seamed edges , unless otherwise stated. Annealed glass does not have any edge work done to it, unless requested.

        Do you ship?

        Yes, we can ship UPS for an added cost. The largest we can ship UPS is 24" x 36".

        We also can ship via freight carriers. This is at an additional cost that is calculated when an order is completed and crated. Then the cost will be added to the order.

        Can you purchase glass from us if you are not a company?

        Yes, we sell to individuals and companies alike.

        What are your lead times?

        Our lead times vary depending on the job. It depends on demand, supplies and job size. Our lead times are our expected completion of job and do not incuded shipping time.

        How can I get pricing for my job?

        You can send us a request for a quote one of two ways. You can fax us a quote request at 856-273-1999 or via email at quotes@jerseytemperedglass.com.

        What are the smallest and largest size of glass you can temper?

        Largest is 59" wide by 120" long.
        Smallest 5" x 5".
        However, trhe smallest size we can polish is 4.5"x4.5"

        What thickness of glass do you temper?

        We can temper any glass 1/8" or thicker up to 1/2". We carry 1/8, 5/32, 3/16, 1/4, 3/8 & 1/2 inches.

        Can I have my own glass tempered?

        Yes, we temper customer's specialty glass as well, as long as it is at least 1/8" or thicker up to 1/2" and is no larger than 59"x120".

        What are you pick up times for customer's?

        Our pick up department is available Monday to Thursday 7:00 am to 2:30 pm and on Friday 7:00 am to 1:30 pm.

        Do you install or feld measure?

        We currently do not install or feild measure a job.

        Drilling Glass is Now Possible with Heat Strengthened Glass from Jersey Tempered Glass

        Builders, and those who craft furniture, know how delicate annealed glass is. When attaching this type of glass to another surface, drilling glass is not an option. Even when using tempered glass, the break pattern makes drilling a real problem. However, drilling through glass is possible when you use Heat Strengthened Glass from Jersey Tempered Glass. Read on to see how JTG has the remedy for a problem that has plagued craftspeople, builders, and DIY-ers.

        How is Drilling Through Glass Now Possible?

        JTG manufactures Heat Strengthened Glass that is available in a variety of thicknesses. It is two times stronger than annealed glass. Glass has traditionally been a very fragile material, and it is not possible to drill through annealed glass.

        Annealed glass, when placed under pressure like that from a drill, will shatter into sharp shards making drilling glass impossible. However, the Heat Strengthened Glass from JTG is stronger, allowing the drilling process to be carried out.

        How is the Heat Strengthened Glass Different from Drilling Tempered Glass?

        When drilling tempered glass, although it is stronger than annealed glass, it breaks into extremely small non-sharp pieces. This safety glass is perfect for fitting in public spaces due to the nature of how it breaks in a safe manner. However, if you want to attach legs to a glass panel when making a coffee or occasional table, fix a mirror to a vanity section of a fitted wardrobe with screws, or connect more than one panel of glass to each other by drilling tempered glass, you will need to use Heat Strengthened Glass.

        Drilling Glass Block Possibilities Open Up for Everyone

        Drilling through glass, including drilling through sea glass, can make a project so much simpler. The possibility of being able to do this opens new ideas and methods of working with glass. Whether you want to be drilling glass blocks or panels, now you can undertake your building projects with a new sense of freedom.

        The available thicknesses of JTGs Heat Strengthened Glass are:

        1.       1/8 inch
        2.       5/32 inch
        3.       3/16 inch
        4.       1/4 inch

        With this range of thicknesses, JTG has every option for your next project, and it will be a simpler project with the ability to drill the glass you purchase. If you have ever wanted to be drilling through sea glass, our Heat Strengthened Glass is perfect for you.

        Conclusion

        There are many instances where the ability to drill a sheet of glass would be beneficial. It could speed up the process of attaching the glass to a structure and make the fixings more stable and solid. Now, this is a reality with JTGs Heat Strengthened Glass. It is two times stronger than annealed glass and does not break into tiny pieces like tempered glass. This is the ideal solution to your problems. Ask for an online quote today!